Bathroom vanity cost Abu Dhabi: 2026 price guide
A made-to-measure bathroom vanity in Abu Dhabi costs AED 6,000 to 8,000 all-in for a standard 60cm to 120cm unit, including the carcass, stone top, basin, tap, delivery and installation. Here is what sits inside that number, what moves it up or down, and how to lock a fixed price before we cut a single panel.
Why work with Just Right Interior Decoration LLC
- Own factory in Jebel Ali, Dubai, delivering and installing across all of the UAE
- Fixed all-in pricing from AED 6,000 to 8,000 per vanity, confirmed before production
- Every vanity built 1:1 to the drawing you approve first
- Around 14 days from approved drawing to installed vanity
- Quartz tops in Super White, Black, Calacatta Miranda and Statuario Exclusive
- Google rating 5 from 2 reviews
What a made-to-measure vanity costs in Abu Dhabi
A standard single vanity between 60cm and 120cm wide lands at AED 6,000 to 8,000 all-in, delivered and installed anywhere in Abu Dhabi. That is the whole price, not a carcass-only figure, and it is fixed in writing before we start work.
| Line | What it covers | Typical AED |
|---|---|---|
| Carcass | Made-to-measure body cut in marine ply or solid wood, doors or drawers, hinges, edge finishing | 2,600 to 3,400 |
| Top | Quartz top cut to your unit, cut-outs for basin and tap, upstand where needed | 1,800 to 2,600 |
| Basin and tap | Undermount or vessel basin with a mixer tap | 700 to 1,200 |
| Delivery and installation | Transport from Jebel Ali, site fitting, levelling, sealing, waste and tap connection | 600 to 900 |
| All-in | 60cm to 120cm single vanity at any Abu Dhabi address | 6,000 to 8,000 |
Take a worked example. A 100cm wall-hung vanity with a marine ply carcass, one quartz top in Super White, a single undermount basin and a chrome mixer comes to AED 7,200 all-in, delivered and installed in Al Reem. Move the same job to Khalifa City or Mussafah and the unit price does not change. Only access matters, such as booking the service lift or a building that stops noisy work after 6pm.
A showroom sticker showing a low vanity unit price Abu Dhabi shoppers see online usually covers the carcass alone, with no top, basin or fitting.
What pushes the price up or down
Five things move the figure: width, top material, carcass material, the number of basins, and whether the unit hangs on the wall or stands on the floor.
Width
Anything up to 120cm stays inside the standard band. A 150cm to 180cm double vanity usually runs AED 9,500 to 13,000, because you are paying for a longer top, a second basin and a wider carcass.
Top material
- Quartz: the standard choice, roughly AED 1,800 to 2,600 for a 100cm top. Non-porous, no annual sealing, and it stands up to Abu Dhabi humidity and everyday bathroom cleaners.
- Sintered stone: AED 2,800 to 4,000. Very thin, very seamless, harder to cut, slightly longer lead time.
- Solid stone with heavy veining: priced per slab, and it wants sealing every 12 to 18 months. Ask for the slab cost before you commit.
Carcass material
Marine ply is the sensible default in the UAE, and it resists moisture far better than particle board for a modest premium, often AED 300 to 500 more per unit. Solid wood is the premium option and looks superb, but it wants a well-ventilated bathroom.
Basins, drawers and fixing
A second basin and tap adds roughly AED 1,200 to 1,800. Drawer banks cost more than doors, around AED 250 to 400 per bank, because of the runners and internal dividers. Wall-hung units need a reinforced fixing inside the wall and a concealed trap, which adds AED 300 to 600 over a floor-standing unit.
A double vanity with a white stone top on light wood cabinetry, built to the customer's approved drawing.
Why bespoke usually beats an off-the-shelf import on total cost
An imported vanity looks cheaper on the box, but the real custom bathroom vanity cost UAE owners end up paying often climbs once the unit has to fit their bathroom.
- Wrong size. A 90cm recess rarely takes a 90cm import cleanly, because tiles, skirting and door frames eat into the gap. You end up with filler panels or a re-cut top. Re-cutting a quartz top costs AED 400 to 800 and carries a genuine risk of cracking the slab.
- Wrong waste position. Off-the-shelf units have a fixed drain position. When yours does not line up, the trap no longer matches and someone has to open the wall.
- Humidity. A glued chipboard carcass swells at the cut edges after a summer of hot showers and cold air conditioning. Swollen doors stop closing squarely, and it happens in year one, not year ten.
- No spares. If a hinge snaps or a door delaminates, there is no matching replacement and no second top from the same batch. Because we keep your approved drawing, we can repair or extend the same unit years later.
- One supplier, one warranty path. Carcass, top, basin and installation come from us rather than four different sellers, so a problem has one place to go.
"Our new bathroom vanity looks beautiful. The custom top fits perfectly. We hired Just Right for the job. The workers were careful and clean." Syed Amaan, 5 out of 5
That review is one of the two behind our Google rating of 5.
How we build and deliver to Abu Dhabi
We manufacture in our own factory in Jebel Ali and install across Abu Dhabi island, Khalifa City, Al Reem, Yas, Saadiyat and Mussafah. Nothing is outsourced, so the vanity you approve on paper is the vanity that arrives.
- You send your measurements or a few photos of the space.
- We issue a fixed all-in quote, valid before anything is built.
- We prepare a 1:1 drawing of your vanity for approval. Full scale means every dimension on the drawing matches the finished unit, so nothing is guessed on site.
- We build the carcass and cut the quartz top in the factory. Around 14 days passes from approved drawing to installation.
- We deliver and install, connect the tap and waste, seal the unit against the wall, and take the packaging away.
- We walk you through the finished vanity and hand over care instructions.
Backlit oval mirrors and a white top on a made-to-measure double vanity.
How to get an exact Abu Dhabi quote
A made to measure bathroom vanity Abu Dhabi quote from us is a single figure you can compare, and you get it before anything is built. No deposit is needed to see the number.
To price it precisely we need the width, depth and height of the space, the waste and tap positions, single or double basin, wall-hung or floor-standing, and your preferred top. Tell us if the old unit needs removing and whether the building has lift or work-hour restrictions, since that affects bathroom vanity installation Abu Dhabi wide. send us your measurements for a fixed Abu Dhabi quote and you will have the figure the same working day. If you want to inspect joinery and top details first, browse vanity units we have already built and installed. We also keep more bathroom vanity guides for the UAE if you want to compare Dubai or Sharjah pricing against Abu Dhabi.
Frequently asked questions
Is AED 6,000 to 8,000 the final price for a vanity in Abu Dhabi?
For a standard single vanity between 60cm and 120cm, yes. That figure includes the made-to-measure carcass, quartz top, basin, tap, delivery to any Abu Dhabi address and installation. Extra basins, wider units, sintered stone tops or drawer upgrades are priced separately and added to the quote before you approve the job.
What is the cost difference between a quartz top and a sintered stone top?
On a 100cm vanity, a quartz top in Super White, Black, Calacatta Miranda or Statuario Exclusive sits around AED 1,800 to 2,600. A sintered stone top of the same size runs roughly AED 2,800 to 4,000. Sintered stone gives a thinner, more seamless edge, while quartz is easier to repair and quicker to supply.
How long from order to an installed vanity in Abu Dhabi?
Plan on about 14 days from the day you approve the drawing to the day the vanity is installed. Everything before that is measurement and drawing approval, which usually takes a couple of days. If your building limits noisy work to certain hours, tell us early so the fitting slot is booked correctly.
Do you handle the plumbing and the removal of the old unit?
We connect the new basin waste and tap to your existing supply and drain, and we can take the old vanity away on request. We do not reroute pipework or move a floor drain, since that needs a licensed plumber and sometimes building approval. Mention removal at quote stage so it is included in the price.
Do you install outside Abu Dhabi city?
Yes. We produce in Jebel Ali and install across all of the UAE, so Abu Dhabi island, Khalifa City, Al Reem, Yas, Saadiyat and Mussafah are routine, along with Sharjah, Ajman, Al Ain and the northern emirates. Delivery to a distant address is scheduled as a fixed slot rather than a same-day call-out.
Is there a warranty on a made-to-measure vanity?
Warranty terms are written into your quote before production starts, so you know exactly what is covered and for how long. The carcass workmanship and the installation are covered by us, while taps and basins keep their manufacturer warranty. Keep your approved drawing, because it also makes any future repair or extension straightforward.
