Bespoke Vanity Unit Dubai Marina Made to Measure
A bespoke vanity unit Dubai Marina service should solve awkward alcove sizes, not force flat pack cabinets into a tower apartment. Just Right Interior Decoration LLC builds made to measure bathroom vanities in our own Dubai workshop and fits them across Dubai Marina, Dubai, and Abu Dhabi in about 14 days.
Why work with Just Right Interior Decoration LLC
- Own Dubai workshop with made to measure manufacturing
- Fixed AED 6,000 to 8,000 all in pricing
- Built 1:1 to your approved drawing in about 14 days
- Google rating 5 from 1 review
- Serves Dubai Marina, Dubai, and Abu Dhabi
- Direct WhatsApp and phone line at +971544833966
Sobia Mari, 5/5: We had a very good experience working with Just Right for our joinery requirements at Asas Capital, Dubai.
If you are in a Marina tower and need a precise quote, book a free measure & quote in Dubai Marina.
How a bespoke vanity unit Dubai Marina apartment works
A bespoke vanity unit Dubai Marina apartment build starts with a measured wall width, depth and basin position rather than a standard cabinet size. We use that survey to draw the unit so it fits the actual alcove in your bathroom.
In older Dubai Marina towers, the pipe boxing and wall returns often leave a 900 mm or 1,150 mm gap. Off the shelf units usually stop at 800 mm or 1,000 mm, leaving an awkward timber filler or unused side gap. Our made to measure route lets you use the full run. We can build a single basin unit at 700 mm to 900 mm for a guest bath or a double basin at 1,400 mm to 1,800 mm for a larger master. our Dubai Marina vanity workshop handles the cutting, edging, carcass assembly and stone templating under one roof, so the drawing is not passed to a third party.
What affects the cost of a custom vanity unit Dubai Marina
Most custom vanity unit Dubai Marina projects fall between AED 6,000 and AED 8,000 all in, depending on width, carcass material, drawer configuration and the stone top you approve. This is the budget we quote after the measure.
A 1,200 mm wall hung vanity in a Dubai Marina apartment with a plywood carcass, soft close drawers, a quartz top and one undercounter basin often lands around AED 6,800. A 1,500 mm double basin unit with a natural marble top and more drawers can move to AED 7,900. We include templating, fabrication, delivery and fitting in the all in figure, so there is no separate design fee or hidden transport charge.
What is included in the AED 6,000 to 8,000 range
- Wall hung or floor mounted carcass
- Plywood or moisture resistant MDF carcass
- Soft close hinges and drawer runners
- Quartz, marble or solid surface top
- One or two basins depending on width
- Delivery and fitting in Dubai Marina, Dubai, and Abu Dhabi
For an Abu Dhabi villa master with a wider run and double basins, expect the upper end of the range because the larger carcass and stone top use more material.
Materials and top choices for a bespoke bathroom vanity Dubai Marina
A bespoke bathroom vanity Dubai Marina unit should be specified by carcass, top and basin separately. That matters more in humid bathrooms than a flat pack cabinet.
Carcass choices
- Plywood: stable, good screw hold, our default for wall hung units
- Moisture resistant MDF: smooth painted finish, suited to high gloss or matte doors
Top choices
- Quartz: stain resistant, low maintenance, common on vanity unit Dubai Marina rental upgrades
- Marble: natural veining, needs sealing, better for owner occupied masters
- Solid surface: easy to repair, available in a wide range of colour options
Natural stone tops are cut and polished in our workshop. The material chosen affects the final cost but not the structural carcass quality. You can see our recent made-to-measure vanity work to compare timber and stone combinations before you lock a material.
This Dubai Marina bathroom uses a floating light wood double vanity with white vessel sinks and organic shaped mirrors.
The 14 day process from measure to install
A made to measure bathroom vanity in Dubai Marina follows five clear steps. Most units are built 1:1 to the approved drawing and fitted in about 14 days.
- You send photos and room dimensions or book a measure. We check the wall, pipe positions and basin size.
- We send a simple drawing with width, depth, height, drawer layout and top material.
- You approve the drawing and pay a deposit. We order the carcass board and stone slab.
- Our Dubai workshop cuts, assembles, sprays and polishes the unit. The top is templated to the actual carcass.
- We deliver and fit the unit in your Dubai Marina, Dubai or Abu Dhabi home. Final balance is collected after you inspect the installed vanity.
This Dubai Marina bathroom pairs a floating double vanity in light wood veneer with a white top and two backlit mirrors.
Dubai Marina vanity unit design for compact towers and larger villas
A vanity unit Dubai Marina tower often prioritises full wall use, wall hung clearance and a small basin. A villa master in Abu Dhabi can use a wider double basin run and more drawer storage.
In a high rise Dubai Marina layout, the bathroom width may only allow a 700 mm to 900 mm wall hung unit. We keep the basin off centre if that avoids the door swing, or split the cabinet into one drawer and one open shelf to maintain leg clearance. In a larger Dubai or Abu Dhabi villa master, a 1,600 mm to 2,000 mm run with two vessel sinks and a full drawer bank works better. The same drawing to approval process applies, but the material quantities and stone templating change.
In Dubai Marina, compact bathrooms often benefit from a wall hung unit because it exposes floor area and makes the room feel less cramped. In an Abu Dhabi villa, you may prefer a floor mounted double vanity with deeper drawers and a marble top. Both are made in the same workshop and built to the same tolerance.
Frequently asked questions
How much does a bespoke vanity unit in Dubai Marina cost?
Most projects cost AED 6,000 to AED 8,000 all in. The final figure depends on the width, carcass material, drawer count and whether you choose quartz, marble or solid surface. We provide a fixed quote after measuring the bathroom.
How long does a made to measure bathroom vanity take in Dubai Marina?
From approval of your drawing, the build usually takes about 14 days. Stone templating, cabinet assembly and finishing happen in our Dubai workshop. We then arrange delivery and fitting at your Dubai Marina, Dubai or Abu Dhabi property.
Can you build a custom vanity unit for a small Dubai Marina apartment alcove?
Yes. We build to odd widths such as 750 mm, 850 mm or 950 mm rather than forcing a standard 800 mm or 1,000 mm cabinet into the recess. The unit can be wall hung to keep the floor clear and make a small bathroom feel lighter.
Do you install the vanity unit in Dubai Marina and Abu Dhabi?
Yes. The all in price includes delivery and fitting in Dubai Marina, Dubai and Abu Dhabi. We do not add a separate installation charge unless there is additional remedial wall work agreed before the build starts.
What materials can I choose for the carcass and top?
Carcass options include plywood and moisture resistant MDF. Top options include quartz, marble and solid surface. Your material choice affects the final price, but every unit uses the same made to measure cutting and assembly process.
Can I see the design before you start building?
Yes. We prepare a drawing from the site measure and build 1:1 to the drawing you approve. You can confirm the width, depth, drawer layout, top material and basin position before any cutting starts.
