Bathroom vanity manufacturer Dubai: built in our own factory
If you want a bathroom vanity manufacturer Dubai homeowners, designers and fit-out contractors can actually visit, this is what we do. Just Right Interior Decoration LLC designs and builds every made-to-measure vanity in our own factory in Jebel Ali, Dubai, then installs it anywhere in the UAE. Nothing is cut until you approve the drawing, and the finished unit is built 1:1 to that drawing.
Why work with Just Right Interior Decoration LLC
- Own manufacturing facility in Jebel Ali, Dubai
- Every vanity built 1:1 to the drawing you approve before production starts
- Fixed all-in pricing, typically AED 6,000 to 8,000 for a double-sink unit
- About 14 days to build, then installation across the UAE
- Free site measurement and CAD drawing before any deposit
- Google rating 5.0 from 2 reviews
What manufacturer means in the Dubai vanity market
In this market the word manufacturer is used loosely, and the three routes you will be offered behave very differently at the invoice and on the calendar.
| Route | Who builds the unit | Typical lead time | What you pay for |
|---|---|---|---|
| Showroom or reseller | A workshop they order from | 4 to 8 weeks | The unit plus a margin, with a lead time you cannot control |
| On-site carpenter | Cut and assembled at your home | Varies by site | Board and labour, with finish quality set by your bathroom instead of a booth |
| Our factory in Jebel Ali | Our own team on our own machines | About 14 days | Materials, build hours and installation, with no middleman layer |
Every layer between you and the saw adds cost and days, and it breaks the paper trail. If your waste pipe sits 40 mm further from the wall than planned, our factory edits the CNC file and recuts the back panel. A reseller has to call the workshop, wait for a reply, then pass an answer back to you.
That matters before you compare custom bathroom vanity Dubai quotes, because the cheapest line on a quote usually has the least detail behind it.
Inside our Jebel Ali production facility
We cut, band, spray and check every unit in one place, and we will show you that place before you pay a deposit. Most bathroom vanity factory Dubai listings will not let you walk the floor. Ours will.
CNC cutting and drilling
Panels, hinge cups and basin cut-outs are machined from the approved drawing, so the second unit matches the first and the tenth matches the second.
Edge-banding
Every exposed edge is sealed, including the ones you only see with a drawer open. In UAE humidity, unsealed board swells at the edges first.
Spray booth
Doors and carcass panels are sprayed in a controlled booth. No dust in your home, no overspray on your tiles, no rushed finish on site.
Quality control before dispatch
Each unit is measured against the drawing and photographed before it leaves the factory. Door gaps and drawer alignment are corrected here, not in your bathroom.
Factory visits are by appointment. Send a WhatsApp message to +971 54 483 3966 and we will confirm a time.
bathroom vanity manufacturer Dubai clients call for made to measure work across the UAE" loading="lazy" decoding="async" /> Built, checked and installed by our own team, with backlit oval mirrors and warm cove lighting above the vanity.
Materials a real manufacturer controls
When you buy from the factory you specify what goes inside the carcass instead of hoping the workshop chose well. This is where most price gaps between quotes actually live.
- Carcass: marine-grade or WBP plywood in wet zones, HMR board for dry sections
- Edges: moisture sealed on all four sides, not only the visible ones
- Tops: quartz cut to your exact length, from our standard range including Super White, Black, Calacatta Miranda and Statuario Exclusive
- Hardware: soft-close hinges and runners, with the brand named on your quotation
- Wet zone: sealed basin cut-outs, silicone along the wall junction and around the tap deck
- Finish: spray applied lacquer or laminate, with the sheen level agreed at drawing stage
We go deeper into carcass options, top materials and finishes in our guide to bathroom vanity materials in Dubai (carcass, tops, finishes).
Made-to-measure process, step by step
Every made to measure bathroom vanity Dubai clients order from us starts the same way, with a measurement and a drawing you sign off. The process is fixed and short.
- Free site measurement. We check wall length, pipe positions, door swing and floor level.
- Drawing approval. You get a CAD drawing with dimensions, top thickness and hardware. You approve it before anything is cut.
- Deposit. 50 percent starts production, the balance is due on installation.
- Build. About 14 days in the Jebel Ali factory, 1:1 to the drawing you approved.
- Installation. Our team levels the doors, fits the top and basins, and seals the wet zone.
- Snag list. We walk the bathroom with you, note anything to adjust and close it out on the same visit.
What a typical vanity costs
A 1,200 mm double-sink unit with carcass, stone top, basins and installation comes in at AED 6,000 to 8,000 all in. Above that range you are normally looking at a run longer than 1,800 mm, a premium slab, upgraded brassware, or two or more units in the same property. The full breakdown, including what each upgrade adds, sits in our bathroom vanity cost Dubai: 2026 price guide.
Our new bathroom vanity looks beautiful. The custom top fits perfectly. We hired Just Right for the job. The workers were careful and clean. Syed Amaan, Google review, 5 stars
White vessel basins, matte black brassware and two oval mirrors on a made to measure light wood vanity.
Vanity supply for trade and projects across the UAE
We supply developers, fit-out contractors, hotels and serviced apartment operators, and we work as a manufacturer rather than a retail counter.
- Batch consistency across identical units, cut from the same drawings and the same finishes
- Staged deliveries scheduled to your programme, whether the project is in Abu Dhabi, Sharjah, Ajman or the northern emirates
- Shop drawings issued in Revit or AutoCAD for consultant approval
- Materials specified to meet Dubai Municipality requirements for commercial interiors
- Supply only if your own installer is on site, or supply and install with our team
Trade clients often order a first unit as a sample, approve it, then release the batch. You can see our installed vanity projects across the Emirates to judge the finish before you commit.
We had a very good experience working with Just Right for our joinery requirements at Asas Capital, Dubai. We had a very tight deadline, with the work needing to be completed within just 5 days. Sobia Mari, Google review, 5 stars
How to vet a bathroom vanity manufacturer in Dubai
Five questions separate a manufacturer from a reseller in one conversation.
- Can I visit the workshop? A factory will say yes. A reseller will offer to show you a finished unit instead.
- Who cuts the top? If it is a stone supplier you never meet, have that supplier named in writing.
- Will I get the drawing I approved next to the unit that ships? We photograph every build against your drawing before dispatch.
- What does the warranty cover? Get hinges, runners, finish and sealing listed on the quotation, not promised verbally.
- Can I see a trade licence and one recent site reference? Ours is a DET registered licence, and we share references in your emirate on request.
When you are ready, book a free site measurement and send a photo of the bathroom with rough dimensions.
Frequently asked questions
How long does it take to build a custom bathroom vanity in the UAE?
About 14 days from approved drawing to finished unit, plus one installation visit. Add a few days for site measurement and drawing approval, so most homes go from first call to fitted vanity in three to four weeks.
Is there a minimum order for a bespoke vanity unit?
No. We build single units for apartments and villas, and we handle multi-unit batches for hotels and serviced apartments from the same Jebel Ali line. Batch work is quoted per project rather than per unit.
Do you deliver and install outside Dubai?
Yes. We install across all of the UAE, including Abu Dhabi, Sharjah, Ajman, Umm Al Quwain, Ras Al Khaimah and Fujairah. Deliveries are scheduled from the Jebel Ali factory, and installs outside Dubai are booked as a full working day.
Do you supply only, or supply and install?
Both. Most clients take supply and installation so one team owns the fit and the sealing. If your fit-out contractor prefers to install, we deliver the finished unit with fixings, top cut-outs and a layout drawing.
What warranty comes with your vanity units?
Our standard warranty covers workmanship, hinges, runners and the sprayed finish, and the exact term is printed on your quotation before you pay the deposit. Sealed wet zones are checked with you at handover.
What are your payment terms?
50 percent on drawing approval to start production, and 50 percent on installation. Trade and project clients can discuss staged payments linked to delivery milestones.
