Double sink vanity Dubai: made to measure in 14 days
A double sink vanity in Dubai is built to your exact wall run in our own factory in Jebel Ali and installed across the UAE about 14 days after you approve the drawing. All in, a made to measure double unit costs from about AED 9,500 to 13,000, and that covers the site survey, the approval drawing, materials, delivery, installation and sealing.
Every vanity is cut 1:1 to the drawing you approve first, so the width on paper is the width that arrives in your bathroom.
vanity unit Dubai with a light wood floating cabinet, two white vessel basins and matte black faucets under backlit oval mirrors" loading="lazy" decoding="async" />
A floating double vanity unit built 1:1 to a signed drawing, with two vessel basins and backlit oval mirrors.
Why work with Just Right Interior Decoration LLC
- Own manufacturing factory in Jebel Ali, Dubai
- Every vanity built 1:1 to the drawing you approve
- Fixed all-in pricing, AED 6,000 to 8,000 for single units
- Around 14 days from approved drawing to installation
- Free site survey and laser measurement before you commit
- Google rating 5 from 2 reviews
Is a double sink vanity right for your bathroom?
Two basins need a clear wall run of at least 1200 mm, and 1500 mm if you want elbow room between users.
Measure the wall between finished surfaces, not from tile edges, because a 1250 mm opening can shrink to 1180 mm once the shower frame and skirting are in. Check these clearances before you commit to a design.
- 1200 mm wall run. Workable for two basins in a compact UAE apartment bathroom.
- 1500 mm wall run. Comfortable, with a slim centre drawer stack between the basins.
- 700 mm to 800 mm of clear floor in front of the unit, so drawers open and you can reach the mirror.
- 900 mm of clear floor if the bathroom door opens inwards towards the vanity.
- 100 mm to 150 mm between the vanity edge and a shower enclosure, so the glass and frame stay cleanable.
If your wall run is under 1200 mm, a single basin is the honest answer. Our single made-to-measure bathroom vanity units run AED 6,000 to 8,000 all-in and give you one generous basin instead of two cramped ones.
Double sink bathroom vanity sizes for UAE bathrooms
A double sink bathroom vanity needs at least 1200 mm of clear wall run, 1500 mm is the comfortable size for two people, and 1800 mm and above gives his and hers sides with a drawer stack each.
Basin centres are the number that matters. Two people using the vanity at the same time need roughly 750 mm between centres to stand without knocking elbows, and that is what a 1500 mm top delivers once the centre drawer stack is allowed for.
Width against basin centres and drawer layout
| Vanity width | Basin centres | Typical layout |
|---|---|---|
| 1200 mm | About 600 mm apart | Two 400 mm basins, no centre stack |
| 1500 mm | About 750 mm apart | Two 450 mm basins, 300 mm centre drawer stack |
| 1800 mm | About 900 mm apart | Two 500 mm basins, full drawer stacks both sides |
Counter depth matters just as much as width. A single vanity can work at 450 mm deep, but a double wants 500 mm to 550 mm so two people can lean in without crowding. Tell us your wall run when you book a free site survey and quote and we will say straight away whether a double fits or not.
Twin vanity, his and hers, double basin vanity
A twin vanity is the same unit as a double sink vanity: one cabinet run with two basins, two wastes and two supplies, drawn 1:1 for your approval before manufacturing starts. People also search for his and hers vanity or double basin vanity, and they describe the same thing. Whichever name you use, the width rules above are what decide whether two basins work on your wall.
Made to measure Dubai: how your wall becomes your unit
Made to measure means the unit is built to your bathroom instead of a fixed catalogue size, so the carcass, the top and the basin cutouts are all cut after you approve a full scale 1:1 drawing.
Catalogue vanities come in set widths, and UAE apartment bathrooms rarely match them once the service shaft, the water heater and the shower frame are in. We laser measure the wall run, the floor level and every waste and supply position at the free survey, then draw the unit 1:1 with basin centres, drawer layout, top edge and upstand marked. Nothing is cut in our Jebel Ali factory until you approve that drawing. If the wall is out of square, the drawing shows it, so the unit is scribed on site rather than forced into place.
Bathroom vanity units UAE: made in Jebel Ali, installed nationwide
We manufacture bathroom vanity units in our own factory in Jebel Ali, Dubai and install them across all of the UAE, so a unit for a bathroom in Sharjah or Abu Dhabi is built to the same drawing and the same tolerances as one for Dubai.
The survey, the approval drawing, the factory build and the installation follow the same steps wherever the bathroom is, and access and travel time are confirmed in the quote rather than added later. Where your existing water and waste points suit the layout, we use them, which keeps the job to roughly a one day installation and avoids breaking tiles.
Bathroom vanity Dubai: single basin or double
A bathroom vanity in Dubai can be a single basin unit from AED 6,000 to 8,000 all-in or a double from about AED 9,500, and both are made to measure in the same factory with the same carcass and top options.
A single basin suits guest bathrooms, powder rooms and compact apartments where the wall run is under 1200 mm. A double is the better spend when two people share the bathroom every morning, because a 1200 mm double costs little more than a well made single in the same materials. Either way the unit is drawn 1:1, priced all in, and only then built.
Wall hung or floor standing, plus the plumbing and lighting decisions
Wall hung frees the floor and is easier to mop, while floor standing carries more weight and hides pipework and service points.
Concealed waste and cabinet depth
A wall hung double needs a concealed waste and a properly fixed rail, usually a steel or timber rail bolted into the wall. In many UAE apartment bathrooms the wall behind the vanity is blockwork with a service shaft nearby, so the fixings have to be planned, not guessed. Floor standing units take a bottle trap inside the cabinet, which is simpler and leaves the wall cleaner.
Water heater access
Small electric water heaters and service valves often sit in the base unit or in a panel behind the vanity in Dubai apartment bathrooms. Keep an access panel, or have us build a removable back so the heater can be serviced without dismantling the unit. Relocating a heater is possible, but it changes the price and the timeline, so raise it at the survey.
Basin centres, mirror width and shaver sockets
Line the mirror up with the basins, not with the wall. Two backlit oval mirrors sit over each basin, or one wide mirror spans the full unit with 100 mm to 200 mm extra at each end. A shaver socket goes about 300 mm above the counter and to the side of a basin rather than directly over it, and mirror lighting should have its own switch so the room light and the mirror light are not fighting each other.
Carcass, tops and edges that survive UAE humidity
Marine ply with WBP glue for the carcass and a quartz top is the combination that lasts in a UAE bathroom, because humidity and daily shower steam are what destroy ordinary cabinet board.
Standard MDF and particleboard swell at cut edges, and the swelling usually starts around the basin cutout and the drawer bottoms. We build the carcass in marine ply with water and boil proof glue, seal every cut edge, and fit corrosion resistant soft close runners and hinges. Silicone is neutral cure, never acid cure, because acid cure silicone can stain a stone top and breaks down faster in a wet room.
For the top, quartz is non-porous, resists soap, shampoo and hard water marks, and does not need sealing. Finishes we supply include Super White, Black, Calacatta Miranda and Statuario Exclusive. The edge is usually a straight 20 mm, with a mitred 40 mm look if you want the top to feel heavier. Against stone cladding, fit a 100 mm upstand scribed tight to the wall and sealed along its top edge, or scribe the top itself to the cladding when the wall is uneven.
bathroom cabinet double sink Dubai build, matte black base with a light beige top and a large round mirror on grey wall tiles" loading="lazy" decoding="async" />
A finish and hardware reference from the factory: matte black cabinet, light beige top, round mirror.
What a double sink vanity costs in Dubai
A 1500 mm double sink vanity in Dubai with a marine ply carcass and a quartz top usually lands between about AED 9,500 and 13,000 all-in, installed and sealed.
| Vanity width | Typical build | All-in installed |
|---|---|---|
| 1200 mm double | Two basins, one drawer bank | From about AED 9,500 |
| 1500 mm double | Two basins, centre drawer stack | From about AED 10,500 |
| 1800 mm double | His and hers, two drawer stacks | About AED 12,000 to 13,000 |
The all-in price covers the site survey, the approval drawing, materials, factory manufacturing in Jebel Ali, delivery, installation, sealing and connection to your existing water and waste points. What moves the number is the stone you choose, how many drawers you add, whether the unit is wall hung, LED mirror and lighting extras, and whether a waste or water pipe has to be moved.
Jobs in Sharjah and Abu Dhabi are quoted the same way, with access and travel time confirmed in the quote rather than added later. Single basin made to measure units stay at AED 6,000 to 8,000 all-in.
The 14 day build, from survey to installation
The clock starts the day you approve the drawing, and most double units are installed about 14 days later.
- Free site survey and laser measure. We check the wall run, floor level, waste and water positions, socket locations, door swing and water heater access.
- Approval drawing. You receive a 1:1 drawing showing widths, basin centres, drawer layout, top edge and upstand before anything is ordered.
- Your approval. Nothing is cut in the factory until you approve that drawing, and any change after that is quoted before we build.
- Factory build in Jebel Ali. Carcass, drawers, top and finishes are made in our own workshop, which is why the size on the drawing is the size you get.
- Delivery and installation. We install across the UAE, including Dubai, Sharjah and Abu Dhabi. A double unit is usually a one day install.
- Seal, test and handover. Waste connections are water tested, the top is sealed to the wall, and drawers and hinges are adjusted on site.
Our new bathroom vanity looks beautiful. The custom top fits perfectly. We hired Just Right for the job. The workers were careful and clean. Syed Amaan, 5 out of 5
That review matches our Google rating of 5 from 2 reviews, and it covers the part of the job we care about most: a top that fits because it was measured and drawn before it was cut. You can see more recent double-vanity installations, and our bathroom vanity guides go deeper on sizing, tops and floating units.
Frequently asked questions
How much does a double sink vanity cost in Dubai?
A made to measure 1500 mm double with a marine ply carcass and a quartz top usually costs between about AED 9,500 and 13,000 all-in, including survey, drawing, manufacturing and installation. A 1200 mm double starts from about AED 9,500, and an 1800 mm his and hers build runs from about AED 12,000. Single basin units are priced at AED 6,000 to 8,000 all-in.
What is the standard width of a double sink vanity?
1200 mm is the minimum for two basins, 1500 mm is the comfortable size for most UAE bathrooms, and 1800 mm and above gives each user their own drawer stack. Anything under 1200 mm should be a single basin, or two people will be knocking elbows every morning. We confirm the right width at the free site survey using a laser measure.
What is a twin vanity?
A twin vanity is another name for a double sink vanity: one cabinet run with two basins, two wastes and two supplies. The sizes are the same, 1200 mm minimum and 1500 mm for comfortable daily use. We draw the layout 1:1 and you approve it before anything is cut in the factory.
Do two basins need two wastes?
In most cases yes, two basins mean two wastes, two traps and two water supplies, and that is how we build them unless the layout allows a shared trap. A shared trap needs a longer horizontal run and the correct fall, so it suits some layouts and not others. We check waste positions at the survey and show the arrangement on your approval drawing.
Is wall hung or floor standing better for a double vanity?
Wall hung is easier to clean and makes a small bathroom feel bigger, and it suits a double unit fixed to a solid wall. Floor standing carries more weight, hides pipework and access panels, and is usually the better choice when a water heater or service point sits behind the unit. Both types are built 1:1 to your approved drawing.
What does made to measure mean for a bathroom vanity?
Made to measure means the unit is built to your wall run, waste positions and floor level instead of being picked from stock sizes. We laser measure at the free survey, produce a full scale 1:1 drawing, and only start manufacturing after you approve it. That is why the finished vanity fits around a service shaft, a water heater or an out of square wall.
Do you install bathroom vanity units across the UAE?
Yes. We manufacture in our factory in Jebel Ali, Dubai and install across all of the UAE, including Sharjah and Abu Dhabi. Access and travel time are confirmed in the quote rather than added later. The survey, drawing, build and installation steps are the same wherever the bathroom is.
Can you make a single basin bathroom vanity instead of a double?
Yes. Single made to measure units run AED 6,000 to 8,000 all-in with the same marine ply carcass and quartz top options. A single is the right answer when the wall run is under 1200 mm. It is still built 1:1 to the drawing you approve first.
Do I have to remove my existing tiles to install a double vanity?
No. In most cases we work to the existing finished wall and floor, and the unit is scribed and sealed to the tiles you already have. Tiles only come off if the waste position has to move or the wall is not flat enough to fix the unit safely. We tell you straight after the survey, before any deposit is taken.
How long does a made to measure double vanity take?
About 14 days from the day you approve the drawing to installation day, with the site survey usually booked within a few days of your first call. Larger units with stone tops and LED mirrors can take slightly longer, and we confirm the date in writing. Installation itself takes about one day for a double unit.
