Bespoke Vanity Unit Dubai Marina Made to Measure
A bespoke vanity unit in Dubai Marina should fit your exact bathroom, not force you to work around a shop-bought cabinet. We build made to measure vanity units in our own Dubai workshop and deliver them across Dubai and Abu Dhabi.
Why work with Just Right Interior Decoration LLC
- Own Dubai workshop
- Custom sizes and carcass materials
- Natural-stone tops
- AED 6,000 to AED 8,000 all-in pricing
- 14-day build after approved drawing
- Google rating 5 from 1 review
Why Dubai Marina bathrooms need a made to measure vanity unit
Most Dubai Marina apartments have compact bathrooms with alcoves or pipe boxing that make standard vanity units a poor fit. A made to measure vanity unit lets you use every centimetre.
In older Marina towers, the vanity often has to sit between a wall and a concealed cistern or above a floor-mounted drain. A 600 mm wide alcove in a Dubai Marina apartment can take a 580 mm carcass with soft-close drawers, leaving service access without losing storage. We also reduce depth to 350 mm where a full 500 mm cabinet would block the bathroom door.
As a custom bathroom vanity manufacturer in Dubai, we start from the room, not from a catalogue. We measure the recess, mark pipe positions and build the vanity around them.
Materials we use for a custom vanity Dubai Marina build
We build every unit on a moisture-resistant plywood or marine plywood carcass and finish it with your choice of natural-stone or engineered top. This matters in humid Marina bathrooms where moisture can swell cheap MDF or chipboard.
- Carcass: 18 mm marine plywood or moisture-resistant plywood
- Top: marble, granite, quartz or travertine
- Finish: matte, satin or high-gloss lacquer
- Hardware: soft-close drawers and door hinges
- Basin support: undermount, vessel or semi-recessed cutout
Stone tops are cut and polished outside the site, then fitted after the carcass is installed. That keeps the bathroom clean and the joints tighter. For a Marina apartment with a wall-hung vanity, we also check the blockwork before fixing the steel brackets.
A light wood double vanity with white vessel sinks, built as a custom bathroom vanity for a Dubai Marina apartment.
How much does a bespoke bathroom vanity cost in Dubai?
A bespoke bathroom vanity in Dubai from our workshop usually sits between AED 6,000 and AED 8,000 all-in. That includes design, materials, build, stone top and standard delivery or install in Dubai Marina and Abu Dhabi.
| Width | Typical build | All-in price | | 800 mm | Wall-hung, two drawers, quartz top | AED 6,000 to AED 6,600 | | 1.2 m | Wall-hung, two drawers, stone top | AED 6,500 to AED 7,500 | | 1.5 m | Double basin, stone top | AED 7,000 to AED 8,000 |
For a 1.2 metre wall-hung unit with two soft-close drawers and a quartz top in Dubai Marina, expect around AED 6,800. If the same unit uses a marble top or needs extra pipe boxing, the quote adjusts before you approve the drawing. The price stays fixed after that.
You can request a free quote for your vanity with rough dimensions and a photo of the bathroom. We will return a ballpark figure before the site visit.
How our design-to-install process works
You approve a 1:1 drawing before we touch any material. The whole process from site measure to installed unit is about 14 days.
- You send us a photo or rough dimensions on WhatsApp at +971544833966.
- We visit your apartment in Dubai Marina, Dubai or Abu Dhabi for a laser measure.
- We send a detailed drawing and fixed price.
- You approve the drawing. We build the unit in our Dubai workshop.
- We deliver and install within about 14 days.
This is how our design-to-install process works. We never cut timber from a verbal description.
We had a very good experience working with Just Right for our joinery requirements at Asas Capital, Dubai. We had a very tight deadline, with the work needing to be completed within just 5 days. Sobia Mari, 5-star Google review
Getting the fit right in Dubai Marina and Abu Dhabi apartments
Job specifics change between Dubai Marina and Abu Dhabi because wall construction and plumbing routing differ. We build the same made to measure vanity unit differently depending on the site.
In a Dubai Marina tower, the vanity may need to bridge a floor-mounted drain with a shallow 350 mm deep cabinet. In an Abu Dhabi villa bathroom, there is often more depth, so we can use full 550 mm drawers and a deeper basin. The drawing shows those differences before you commit.
We also handle areas where the client is not doing a full bathroom renovation. The vanity can be installed around existing floor tiles and wall tiles if the plumbing points are already set.
A completed bathroom with a light wood vanity, white countertop and oval LED backlit mirrors in a Dubai Marina home.
You can see bespoke vanity units we've built in both apartment and villa bathrooms.
Frequently asked questions
How much does a bespoke vanity unit cost in Dubai Marina?
Our made to measure vanity units typically cost AED 6,000 to AED 8,000 all-in. The price includes the carcass, stone top, basin-ready cutout, delivery and standard installation. You get a fixed quote after the drawing is approved.
How long does it take to build a custom vanity unit in Dubai?
Most units are built in about 14 days after you approve the 1:1 drawing. Site measure and drawing usually take one to two days before that. Tight deadlines are possible in some cases.
Can you build a vanity unit to fit an alcove or tight bathroom?
Yes. We cut the carcass to your exact recess, including pipe boxing and shallow depth. This is often the main reason Dubai Marina clients choose a made to measure vanity instead of a standard cabinet.
Do you install custom vanity units in Abu Dhabi?
Yes. We serve Abu Dhabi and the surrounding city area. We arrange site measurement and installation there, while the unit is built in our Dubai workshop.
What materials do you use for a bespoke bathroom vanity in Dubai?
We use moisture-resistant plywood or marine plywood for the carcass and a natural-stone top in marble, granite, quartz or travertine. You can also choose matte or satin lacquer finishes.
Do I need to approve drawings before you build my vanity?
Yes. We send a 1:1 drawing for your approval before production starts. We do not cut materials until you confirm the dimensions and top choice.
