Bathroom vanity cost Sharjah: 2026 price guide
A made-to-measure bathroom vanity in Sharjah costs AED 6,000 to AED 8,000 all-in in 2026, covering carcass, top, basin, hardware, delivery and installation. Width, carcass material and top material are what move you up or down inside that band.
Why work with Just Right Interior Decoration LLC
- Own factory in Jebel Ali, Dubai
- Made-to-measure builds to your approved drawing
- Installation across all of the UAE
- All-in pricing from AED 6,000 to 8,000
- About 14 days from drawing sign-off to fitted unit
- Google rating 5 from 2 reviews
What a made-to-measure vanity costs in Sharjah
Most Sharjah jobs we quote land between AED 6,000 and AED 8,000 for the complete unit, built to your wall and fitted. Nothing is ordered until you approve the drawing, so the price you sign is the price you pay.
Width is the biggest single lever.
| Vanity width | Layout | Typical all-in price |
|---|---|---|
| 600mm to 750mm | Single basin, wall hung | AED 6,000 |
| 800mm to 900mm | Single basin with drawer stack | AED 6,800 |
| 1,200mm to 1,500mm | Double basin, twin drawers | AED 8,000 |
A concrete example inside the band. A 1,200mm double vanity with a marine plywood carcass, a Carrara-look natural stone top and soft-close drawers, delivered and fitted in Sharjah, comes to AED 7,400. A ground floor villa in Al Majaz and a sixth floor apartment in Al Nahda both sit in that figure. The difference is access time, not materials.
Our new bathroom vanity looks beautiful. The custom top fits perfectly. We hired Just Right for the job. The workers were careful and clean. Syed Amaan, Google review, 5/5
The Google rating sits at 5 from 2 reviews, and the recurring theme is the accuracy of the fit and the tidiness of the install.
If you want to compare emirates before you commit, the bathroom vanity cost in Dubai guide uses the same AED 6,000 to 8,000 band. For the build itself, see custom bathroom vanity in Sharjah.
What drives the price up or down
Four things decide where you land inside the band: carcass material, top material, hardware and the site conditions in your building.
Carcass material
Marine plywood is the default for bathrooms in the UAE and the safest choice in a room with a shower. It holds its shape when a wall is slightly out of square and it tolerates the humidity that builds up between uses. MDF costs less and is fine in a powder room with no shower. Solid wood sits at the top of the band, heavy and beautiful, but it needs stable air conditioning to stay put.
Top material
A natural stone top in a Carrara look is what most Sharjah clients pick, and it is what the AED 7,400 example above uses. Quartz is non-porous and shrugs off lime scale and hair dye, so it suits busy family bathrooms. Porcelain slabs are the lightest option and work well on a wall hung unit where weight matters.
Hardware and internals
Soft-close runners, drawer dividers, internal lighting and handle finish all sit in this line. Upgrading runners and adding an internal socket for a shaver point or a hairdryer is usually the cheapest way to make a standard vanity feel custom.
Sharjah site factors
Older villas in Muwailih and Al Nahda frequently have walls that are not square and tiling that runs slightly off level, which is why we template on site rather than trusting a tape measure. Apartment blocks need lift booking and corridor protection. In a city with high humidity, the water shut-off point and the silicone sealing around the top and splashback matter more than the finish, because a leak behind a vanity is a far bigger bill than the vanity itself.
bathroom vanity cost Sharjah budgets toward the top of the band" loading="lazy" decoding="async" /> Chevron tiling, niches and layered lighting in a completed beige bathroom.
What a Sharjah quote must itemise
A proper quote is a list, not a single number. Ours runs to these lines, and any Sharjah quote you compare should carry them too.
- Site measure and template visit, with the date
- Drawing approval before any cutting starts
- Carcass material named, not described as premium
- Top material, thickness and edge profile
- Basin type and whether the tap is included
- Hardware brand for hinges and runners
- Delivery address and any lift or access booking
- Installation, silicone sealing and waterproofing at the wall
- Removal of the old unit and all packaging
- Building management NOC or access approval where the tower requires one
Sharjah Municipality approval is rarely needed for a straight swap of a vanity inside your own bathroom. It becomes relevant if you move a water point, change the drainage or alter the room layout. On the water side, the local utility connection matters, SEWA in Sharjah and DEWA in Dubai, so flag any plan to relocate the supply or the waste pipe before the drawing is finalised.
Hidden costs to avoid
Three patterns show up again and again in Sharjah quotes, and all three cost you money later.
A quote for a standard 800mm size that quietly grows once your actual wall is measured. Ask for the price to be given against a measured width.
A price that excludes top cutting. Natural stone has to be cut for the basin and the tap holes, and that cutting is part of the job. If it is missing from the quote it will appear on the invoice.
A quote written without a site visit. Wall tolerances, pipe positions and door swing all change the drawing, and none of them can be read from a photo. A skipped measure is the most common reason a vanity arrives and does not fit.
The 14 day timeline for a Sharjah vanity
From the day you approve the drawing to the day the unit is sealed in place, a made-to-measure vanity takes about 14 days.
- Day 1 to 3: site measure, template, drawing issued and signed off by you.
- Day 4 to 11: carcass cut, assembled and finished, top cut and polished, in our factory in Jebel Ali, Dubai.
- Day 12 to 14: delivery to your address in Sharjah, installation, connection to the existing water point, silicone sealing and waste removal.
If your building needs an NOC or a lift booking, add that to day 1 to 3 so nothing slips.
How to compare three Sharjah quotes
Put the three quotes side by side and read the material lines first, not the totals. A AED 6,000 quote with MDF and a porcelain top and a AED 8,000 quote with marine plywood and natural stone are not the same product, and the cheaper one is not automatically cheaper.
Check four things. Whether the width is stated against a real measurement. Whether the top cutting is included. Whether delivery, installation and waste removal are inside the number. And whether the timeline is written down. If a quote answers all four, you can compare it honestly. If you are also weighing a move north, vanity prices in Abu Dhabi follow the same structure.
bathroom vanity cost Sharjah homeowners pay" loading="lazy" decoding="async" /> Colour matched joinery and a black vessel sink in a finished powder room.
When you are ready, book a free Sharjah site visit and quote. Pricing is confirmed after the measure, because that is the only honest way to price a made-to-measure unit.
Frequently asked questions
How much does a custom bathroom vanity cost in Sharjah?
For a complete made-to-measure unit, expect AED 6,000 to AED 8,000 all-in in 2026. A 600mm single vanity with a marine plywood carcass sits at the lower end, while a 1,200mm double with a natural stone top lands around AED 7,400 to AED 8,000. Delivery, installation and silicone sealing are inside that figure.
Is a marble top worth it in UAE humidity?
A natural stone top in a Carrara look is fine in a UAE bathroom as long as it is sealed and the silicone line behind the basin is done properly. Marble is softer and can mark with acidic cleaners, so many Sharjah families choose quartz for a daily use bathroom and reserve natural stone for a powder room that sees less water.
How long does a custom vanity take to build?
About 14 days from drawing sign-off. Days 1 to 3 cover the site measure and the drawing you approve, days 4 to 11 are the factory build in Jebel Ali, Dubai, and days 12 to 14 are delivery and installation at your address in Sharjah.
Do you install in Sharjah if your factory is in Dubai?
Yes. The factory is in Jebel Ali, Dubai and we install across all of the UAE, including Sharjah, Ajman and Abu Dhabi. Delivery and fitting usually happen in a single visit once the unit is finished.
Is a free quote or site visit offered?
Yes. We visit, measure and template at no charge, then issue a fixed price against the approved drawing. Call or WhatsApp +971544833966 to arrange a time that suits your building access rules.
